Showing 1–24 of 40 results

  • Pump Couplings

    Pump Couplings (2)

  • Pump Parts

    Pump Parts (11)

  • Pumps

    Pumps (27)

  • Impeller 2Impeller 1

    316 Stainless Steel Impeller

    • 316 STAINLESS STEEL 7 ½” TRIM FOR GOULDS CENTRIFUGAL PUMP

    Contact us for more information

  • AP SUBMERSIBLE PUMP

    6” Submersible Pump 50-75-120-170-230 GPM

    • The AP series 6″ submersible pump can work under harsh conditions such as abrasive waters.
    • Impellers and diffusers manufactured in Noryl. Shaft and pump body in stainless steel. Internal check valve included.
    • 3 phase, 230/460V, 575V
    • Pump shaft and shell made of 304 stainless steel
    • Discharge = 3″
    • Internal check valve included

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394.

  • Rigid Shaft CouplingCross Section Dual Coupling

    Aftermarket Rigid Couplings

    Aftermarket RIGID COUPLINGS for vertical in-line centrifugal pumps, stainless steel material, with any
    size of pump & motor shaft.

    Material Stainless Steel for corrosion protection 0”- 0.003” TRI

  • Armshaft M

    ARMSTRONG 4030 M PUMP SHAFT

    Part# 826761-001

    Armstrong Part List PDF

  • Armstrong vertical pump

    Armstrong 4x4x10 series 4300

    Armstrong 4x4x10 series 4300 vertical in-line pump

    • Newly rebuilt
    • Bronze impeller
    • Viton mechanical seal with flush line
    • 20HP motor.

    Excellent for HVAC systems.

    As always, please contact us if you are interested in any of our pumps.

  • atlas-copco-3atlas-copco-2

    Atlas Copco 1616754800

    This is a brand new Atlas Copco 1616754800 with Dual Lip PTFE Stainless Steel Oil Seals for Mixers Compressors Pumps High Pressure Rotary Lip Seal.

  • Stuffing Box 1Stuffing Box Backside

    Back Plate & Stuffing Box

    • 316 STAINLESS STEEL FOR 3196 GOULDS CENTRIFUGAL PUMP

    Contact us for more information

  • FLS SUBMERSIBLE PUMP

    FLS 4” Stainless Steel Submersible Pump 6-10-15-25 GPM

    • Bracket, discharge head, external check valve, shaft, discs and pump housing are all made of stainless steel.
    • Impellers and diffusers manufactured in Noryl. Shaft and pump body in stainless steel. Internal check valve included.
    • 3 phase, 230/460V, 575V
    • Pump shaft and shell made of 304 stainless steel
    • Discharge = 3″
    • Internal check valve included

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394

  • FLT SUBMERSIBLE PUMP

    FLT 4” Stainless Steel Submersible Pump 6-10-15-25 GPM

    • New thermoplastic FLT pump feature an improved design that delivers better performance and durability, for pumps that pass the most stringent long-term-reliability tests with flying colors.
    • Bracket and discharge head made of thermoplastic. Internal check valve, shaft, discs and pump housing are all made of stainless steel.
    • Single phase, 115/230V
    • Monophase or triplephase, 2 wire + ground, or 3 wire + ground starting at 1/2 H.P. all the way up to 5 H.P. (6 G.P.M. to 25 G.P.M.)

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394

  • FP SUBMERSIBLE PUMP

    FP 4” Stainless Steel Submersible Pump 35-50-80 GPM

    • The FP 4″ submersible pump will provide efficient and reliable performance.
    • Impellers and diffusers made of polycarbonate. Shaft and pump body in stainless steel. Internal check valve included.
    • Single phase, 230V, 3 phase 575V
    • Discharge – 2″
    • Control box included with 3 wire motor

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394

  • General Pumpt9961

    General Pump T9961

    Pressure Pump

    • Solid 3 ceramic plungers with continuously lubricated packings
    • Maximum inlet pressure: 125 psi
    • Maximum fluid temperature: 165°F
    • Pump dimensions: 9,3″ x 8,3″ x 5,4″
    • Maximum inlet vacuum: 9′ water (7,9″ Hg)
    • Crankcase oil capacity: 15,2 oz
    • Flow rate 4,00 GPM
    • Operating pressure LB / PO2 1 100 psi
    • Power 3,0 hp
    • Maximum pump speed 1 750 rpm
    • Shaft diameter 0,945″ / 24 mm
    • Inlet port thread 1/2″ – 14 BSP-F
    • Discharge port thread 3/8″ – 19 BSP-F
    • Bore 0,787″ / 20 mm
    • Stroke 0,394″ / 10 mm
  • GR Wear Plate Front SideGR Wear Plate Backside

    Gorman-Rupp PA6C60-4045T Centrifugal Pump, Aftermarket Part.

    • Gorman-Rupp PA6C60-4045T centrifugal pump, aftermarket part.
    • Wear Plate part# 38691-864 11010
    • Material: Cast iron
    • Price $625 CAD, short lead time

    Contact us to order

  • Goulds Booster PumpGoulds Booster Pump Close up

    Goulds High Pressure Multi-Stage Booster Pumps

    18GBS3018Q4 Stainless Steel, 15 Stages pump

    Applications:

    • Residential, commercial or agricultural pressure wash
    • Reverse osmosis
    • Evaporative cooling systems/misters
    • Booster Service
    • Spray systems
    • Water Circulation
    • Filtration
    • HVAC
    • General Purpose pumping

    Specifications

    • Maximum Flow: 28 GPM
    • Minimum Flow: 6 GPM
    • Heads: to 470 ft. (203 PSI)
    • Pipe Connections: 1″ NPT Suction and Discharge

    Download the Model GB Manual

    Visit our Resources page for more manuals.

  • Goulds Sump Pump 3Goulds Sump Pump 4

    Goulds Non-Clog Dual Seal Submersible Sewage Pump

    Brand New – Goulds Non-Clog Dual Seal Submersible Sewage Pump

    • 3SD52J5AAH, 3SD Series, Cast Iron Housing
    • 3″ Discharge, Flange Connection
    • impeller size 8”
    • 5 HP motor
    • 3-Phase, 60 HZ, 575V, 1750 RPM, 6.8 Max Amps
    • 2-1/2″ Max Solids

    *Rated for Temperatures up to +104°F, 8.00″ Impeller, Cast Iron Impeller Construction, Silicon Carbide vs. Silicon Carbide (Outer Seal)/Ceramic vs. Carbon (Inner Seal) Mechanical Seal, Buna-N Elastomer, 20 Ft. Cord, 50 Ft. Max Submergence.

    Read the Brochure

  • Gould pump volute casingGould pump volute casing 2

    Goulds Pump Volute Casing

    • Manufacturer: Goulds
    • Pump Model: 3196
    • Material: Stainless Steel
    • Will Fit Impeller Diameter: 5″
    • Suction: 3″
    • Discharge: 2″

    Contact us for more information.

  • Grundfos PumpUnit Label

    Grundfos Recirculation Pump UPS 15-58

    • Rating 1/25 HP, Pump Body Material Cast Iron, 
    • Voltage Rating 115 Volts, 
    • Phase. Single, 
    • Full Load Current 0.74 Amp, 
    • Thermal Protection Auto, Maximum. 
    • Temperature 230 Degrees Fahrenheit
    • Speed 2590 RPM, 
    • Pipe Size Return In 1 1/4 Inches, 
    • Pipe Size Supply In. 1 1/2 Inches, 
    • Flow @ 11 Feet of Head 7.7 GPM
  • HAND PUMP

    Hand Pumps

    We offers a variety of hand pumps: Semi-rotary hand pumps, hand pumps, hand rotary pumps, drinking water pumps, 5 to 45 GAL drum pump, quart stroke oil pump, siphon pump, battery pump.

    Available models

    • SEMI‐ROTARY HAND PUMPS
    • BATTERY PUMP 2 x “D” batteries required (not included)
    • SIPHON PUMPS
    • PITCHER PUMPS
    • 45 GAL. DRUM PUMPS
    • QUART STROKE OIL PUMP
    • DRINKING WATER PUMP

    Please call for more information 905-664-1394.

  • JSS PUMP

    JSS Stainless Steel Pump – Ideal for Drinking Water

    • The JSS shallow well pump is the perfect pump for a summer cottage or even a country house.
    • The pump body is made of stainless steel and the motor housing is made of aluminum giving it a much better heat dissipation when needed.
    • Single-phase 115/230V
    • 304 stainless steel body
    • Suction until 25 feet of depth
    • Pressure switch and pressure gauge are included and assembled.

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394

  • Lovejoy L-100 couplingLovejoy L-100 coupling 3

    Lovejoy L-100 Coupling

    Lovejoy L-100 coupling, 5/8 W/ 5/32 X 5/64 KW HUB

    SPECIFICATIONS

    • Coupling Size Code L100
    • Bore Type Finished w/ Keyway
    • Bore Diameter 0.625 in
    • Jaw Type Straight
    • Hub Material Iron
    • Outside Diameter 2.5400 in
    • Length through Bore 1.3800 in
    • Coupling Overall Length 3.4800 in
    • Hub End Diameter 2.54 in
    • Torque Capacity 1134 in-lbs
    • Screw Clamp Type Set Screw
    • Series L
  • MJ JET PUMP

    MJ Pump

    • The MJ jet pumps are exceptionally reliable and efficient.  Specially designed for domestic purposes, they can also be used to pump water from wells, streams, ponds and many other sources of water.
    • , the high‐precision impeller assures the MJ models an optimum efficiency.   To eliminate all vibrations, the impeller is screwed to the shaft of the motor.
    • Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
    • 0 – 100 PSI pressure gauge
    • Pressure switch set at 30 to 50 lbs/in2

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394

  • Nachi PZS-6B-180N4-E10Nachi PZS-6B-180N4-E10 2

    Nachi PZS-6B-180N4-E10

    • Hydraulic Piston pump.
    • Energy-saving type with drastically reduced loss.
    • Silent type that demonstrates its power quietly.

    Please see Cut Sheet for detailed specifications.

  • Barnes Sewage Pump 1Barnes Sewage Pump in Box

    New Barnes 2SEV2022L Submersible Sewage Ejector Pump

    • 2” discharge
    • 2HP motor @ 230V
    • 60 Hz, single phase
    • 3450 RPM
    • 2” solid handling
    • 20” cord lg.
    • Vortex impeller
    • Single seal
    • Liquid temperature 104° (40° C).

    Informative Links:

    1. Datasheet
    2. https://www.pumpcatalog.com/barnes/2sev-ds-l-series/2sev2022l/
  • OC-OCB CENTRIFUGAL PUMP

    OC/OCB Centrifugal Pumps

    • The OC/OCB centrifugal pumps allow for optimum efficiency and economy, a good production capacity even when the flow is at a low or medium level.
    • Used for applications such as lawn sprinklers, oversupplying systems, irrigation or for filling tanks.
    • Single-phase 115/230V, 230/460V, 575V
    • Impeller on OC models: Made of Noryl molded with great precision for maximum efficiency.
    • Impeller on OCB models: Made of bronze, for pumping liquid at high temperature such as in boiler systems.

    MADE in CANADA
    All pumps are tested at the factory
    Please call for more information 905-664-1394

  • Duroflow Rebuild KitDuroflow Rebuild Kit 2

    Overhaul Kit for DuroFlow Series

    Overhaul Kit for DuroFlow Series DUROFLOW 45 INDUSTRIAL “D”

    • Manufacturer Part Number: 303GGD6010

    An overhaul kit will contain the components to tear the blower apart and rebuild it, replacing wear items in the process. All seals, bearings, gaskets/o-rings, any locking nuts or bolts and shims will be included.

    The components included will vary depending on model size.