• The AP series 6″ submersible pump can work under harsh conditions such as abrasive waters.
• Impellers and diffusers manufactured in Noryl. Shaft and pump body in stainless steel. Internal check valve included.
• 3 phase, 230/460V, 575V
• Pump shaft and shell made of 304 stainless steel
• Discharge = 3″
• Internal check valve included

MADE in CANADA

SHOP NOW

Armstrong 4x4x10 series 4300 vertical in-line pump

• Newly rebuilt
• Bronze impeller
• Viton mechanical seal with flush line
• 20HP motor.

Excellent for HVAC systems.

SHOP NOW

• Bracket, discharge head, external check valve, shaft, discs and pump housing are all made of stainless steel.
• Impellers and diffusers manufactured in Noryl. Shaft and pump body in stainless steel. Internal check valve included.
• 3 phase, 230/460V, 575V
• Pump shaft and shell made of 304 stainless steel
• Discharge = 3″
• Internal check valve included

MADE in CANADA

SHOP NOW

Pressure Pump

• Maximum inlet pressure: 125 psi
• Maximum fluid temperature: 165°F
• Pump dimensions: 9,3″ x 8,3″ x 5,4″
• Maximum inlet vacuum: 9′ water (7,9″ Hg)
• Crankcase oil capacity: 15,2 oz
• Flow rate 4,00 GPM
• Operating pressure LB / PO2 1 100 psi
• Power 3,0 hp
• Maximum pump speed 1 750 rpm
• Shaft diameter 0,945″ / 24 mm
• Inlet port thread 1/2″ – 14 BSP-F
• Discharge port thread 3/8″ – 19 BSP-F
• Bore 0,787″ / 20 mm
• Stroke 0,394″ / 10 mm

SHOP NOW

Brand New – Goulds Non-Clog Dual Seal Submersible Sewage Pump

• 3SD52J5AAH, 3SD Series, Cast Iron Housing
• 3″ Discharge, Flange Connection
• impeller size 8”
• 5 HP motor
• 3-Phase, 60 HZ, 575V, 1750 RPM, 6.8 Max Amps
• 2-1/2″ Max Solids

Read the Brochure

SHOP NOW

Available models

• SEMI‐ROTARY HAND PUMPS
• BATTERY PUMP 2 x “D” batteries required (not included)
• SIPHON PUMPS
• PITCHER PUMPS
• 45 GAL. DRUM PUMPS
• QUART STROKE OIL PUMP
• DRINKING WATER PUMP

SHOP NOW

• The high‐precision impeller assures the MJ models an optimum efficiency.   To eliminate all vibrations, the impeller is screwed to the shaft of the motor.
• Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
• 0 – 100 PSI pressure gauge
• Pressure switch set at 30 to 50 lbs/in2

MADE in CANADA

SHOP NOW

• Used for applications such as lawn sprinklers, oversupplying systems, irrigation or for filling tanks.
• Single-phase 115/230V, 230/460V, 575V
• Impeller on OC models: Made of Noryl molded with great precision for maximum efficiency.
• Impeller on OCB models: Made of bronze, for pumping liquid at high temperature such as in boiler systems.

MADE in CANADA

SHOP NOW