Showing 25–40 of 40 results
-
- Onsite maintenance possible due to an easy access to internal parts
- Built tough for a longer life span
- Constant pumping, even with the presence of air in water
- Double-action piston, single cylinder
- Continuous efficiency at various pressures
- Increased resistance to particles in water
- Priming up to 25 feet (7.62 m)
- Safety valve 100 PSI
- Available in 2 models (S-275, S-600) and 2 versions:
- Complete Pump: pump, motor and pressure switch set at 30/50 lbs/in2
- Pump only: no motor and pressure switch
MADE in CANADA
-
- The convertible PJC model can be used in wells up to 90 feet (27.4M) deep.
- Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
- 0 – 100 PSI pressure gauge
- Pressure switch set at 30 to 50 lbs/in2
MADE in CANADA
-
- Used for lawn sprinkling systems, irrigation and other applications.
- With its high water capacity, priming is quick and simple (primes up to 25 feet or 7.62M).
- 115/230 V, 230/460 V, 575 V
- Maximum water volume in pump housing assures easy and fast priming.
- Long life assured by non‐corrosive paint and strong construction.
MADE in CANADA
-
- Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
- 0 – 100 PSI pressure gauge
- Pressure switch set at 30 to 50 lbs/in2
MADE in CANADA
All pumps are tested at the factory
-
The PXP high pressure booster pump is used in a wide range of applications
- Reverse osmosis
- Single-phase 115/230V
- 3 phase 230V, 575V
- Up to 520 PSI
MADE in CANADA
-
Newly rebuild SANDPIPER 1½” (40 MM) S15 air operated dual diaphragm pump. Aluminum body provides superior suction lift of greater than 22 ft (6.7 m).
Designed for outstanding operation, this versatile and mobile pump is perfect for OEM applications.
Equipped to handle abrasive fluids and suspended solids, it gives exceptional performance in harsh chemical applications where reliability is critical.
For more information please check the data sheet here.
-
Seal Kit part# 364500005 for:
- Ebara CDXHS CDXHSM 70, 90, 120, 200
- Silicon Viton
- Temp max 110 C -230F
- Includes all O Rings, Impeller nut, Shaft key, Splash ring
-
- Each model has a motor with thermal protection and automatic restart.
- Float not included, sold separately
- Cast iron body
MADE in CANADA
-
- Shaft size: 1.500” diameter
- Material: 316
We can machine this sleeve from any custom material needs it, such as: Duplex, 316 ss, Alloy 20, Titanium etc.
-
We machine and have in stock replacement shaft sleeve and collars for MP Pumps 5-10 HP motor.
- Material: 316 stainless.
- 1.500” seal diameter x 1.125” motor shaft diameter.
-
- Mechanical seal: type SRC 1 ¾” size
- Metal parts: 316 stainless steel
- Face: Tungsten Carbide – Silbide
- O-rings: Aflas
- Material code: UAA0028SRC-AJAA-00
-
- The SSPC pump is one of the most efficient pump on the market.
- The SSPC pump was designed to provide optimal performance in a variety of applications. Specially designed to be easily modified or customized
- Single-phase 115/230V, 230/460V, 575V
- The stainless steel body and impeller assure a longer life span.
MADE in CANADA
All pumps are tested at the factory
-
The Stokes Microvac pumps are self-contained, oil-sealed rotary piston type units. The piston is driven eccentrically around the pump shaft and guides through two floating hinge bars that are free to oscillate in the pump housing.
The exhaust valves are of the corrosion-resistant, heavy duty, poppet type. When the pump is in operation, lubrication of the internal parts is completely automatic. Oil is forced by atmospheric pressure from the reservoir through the oil lines to the shaft bearings.
The oil is then fed into the pump to provide the necessary piston-to-cylinder oil seal. Finally, the oil is forced out through the exhaust valve with the air and returns to the reservoir.
A solenoid valve automatically prevents oil from flooding the pump in the event of a power failure, or when the pump is shutdown without vacuum being broken.
For more information please check the data sheet here.
-
- Each model has a motor with thermal protection and automatic restart.
- Float cord, vertical float
- Cast iron body for SBI and SLF, plastic for SU
- Thermal protection with automatic reset.
- Single phase, 120V
MADE in CANADA
-
This is a very versatile industrial blower for applications such as: Solvent Distillation-Vapour Recovery, Pneumatic Conveying, Carpet Cleaning, Fluidization-Agitation of Dense Powders, Mobile Vacuum Waste Removal, Pulp/Paper Processing, Fluid Bed Combustion, Digester Gas Processing, Pressure Boosting, Oil-Free Handling Fuel, Utility or Process Gases, Laser Recirculation Systems, Steam Compression, Soil Vapour Extraction, Process Gas Boosting.
-
These pumps are commonly used for the following:
- Vacuum furnace evacuation
- Backing turbo-molecular pumps
- Backing diffusion pumps
- Rotary evaporation
- Refrigeration system evacuation
- Vacuum sterilization
- Backing mass spectrometers
- Freeze drying
- Vacuum centrifugal applications
- Vacuum distillation
- Space research
- and other vacuum processes.
For more information please check the data sheet here.
